Kubota SSV75PHFRC 74.3HP Diesel Wheeled Skid Steer Loader - Used 2022
VIEW IN AR
SCAN THE QR CODE TO VIEW THIS ITEM IN YOUR SPACE
INTERACT WITH 3D VIEW
Product Features
Engine- Emission Certification: Tier 4, Teak Torque: 196 Ft.-Lbs, Aspiration: Turbocharged, Loader Performance - Rated Operating Capacity: 2690 Lbs, Tipping Load: 5380 Lbs, Breakout Performance: Bucket: 5884 Lbs, Lift Arm: 4850 Lbs, Lift Arm Path: Vertical, Power Train: Chain Size: 100 In.
Travel Speed: 7.4 Mph Low, 11.8 Mph High, Traction Force - 8494 Ft.-Lbs, Hydraulic System - Loader Hydraulic Flow: 20.9 Gpm, Loader Hydraulic Pressure: 3271 Psi, Auxiliary Hydraulic Flow - Standards: 20.9 Gpm, High: 30.4 Gpm, Rugged loader arm design with long reach and high
Bucket Hinge Pin Height - Versatile vertical lift geometry. Hinge pin location provides maximum clearance. Auxiliary hydraulic lines routed through loader arm for safer protection. Wide cab with lots of extras. 36 In. Between the side screens is the widest in the skid steer industry; lots of elbow room. Less fatigue on your feet with an ergonomically designed foot pedal location. Easy effort sliding front door for maximum visibility and no interference with loader arms. Standard side lighting to extend the work day. Standard, wide, rear view mirror. Side windows on enclosed cab installed outside the side screen for easier cleaning. Bolt-on grab handles that can be replaced without compromising ROPs integrity. Tilt the cab with the loader arms up or down
Door Enclosed Fuel Tank and Easy Refill Access - Standard Heavy Duty Rear Door with no louvers or punch outs to protect fuel tank and other peripherals. More room in the engine compartment since fuel tank installed on inside of heavy duty rear door
Top Mounted Radiator and Oil Cooler - Easily removable top screen allows for easy cleaning. More access to daily service checks since radiator and oil cooler are out of the way
Enclosed cab, pilot/hand controls, backup camera, aux. hydraulics, heat, A/C, 2-speed, high flow, ksr kubota shockless ride control, hydraulic quick attach, bucket
Cooling System and Variable Fan - Allows for more efficient engine cooling. Lessens noise levels
Easy Battery Access - aNo additional access panels to remove. Easy to reach with jumper cables to jump start your other equipment
Common Rail System and Diesel Particulate Filter (DPF) Muffler - Better fuel efficiency. Auto regeneration. Inhibit switch. Easy Access to Routine Checks with most grease zerks recessed. The heavy rear door opens wide, providing access to all components including the battery, air cleaner, filters, and all fluid drains. Standard Two-Speed Travel - Shift from low gear at 7.4 mph (SSV75) to high gear at 11.8 mph (SSV75) to get the job done faster
Multi-Function Levers - Horn, KSR, Aux electrical control switch, Aux electrical control switch or turn signals, Single/two speed switch, Aux electrical control switch, Aux electrical control switch, Aux port variable switch for proportional flow, Aux hold switch for continuous flow, Self-leveling function with Kubota Shockless Ride (KSR)
-
In Stock For Store Pick Up
$48,99500
Out of Stock
Made In USAKubota SSV75PHFRC 74.3HP Diesel Wheeled Skid Steer Loader - Used 2022
Out of Stock
Out of Stock
Qty
(Max. order of 1,000)
Selected Store
Secure Checkout
Pay over time with Affirm on orders below $17,500
Product Details
Kubota SSV75PHFRC 74.3HP Diesel Wheeled Skid Steer Loader - Used 2022
Kubota
Description
Kubota SSV75PHFRC 74.3HP Diesel Wheeled Skid Steer Loader - Used 2022
This USED 2022 Kubota (SSV75PHFRC) wheeled skid steer loader has a 74.3 HP (horsepower) engine with a 5,380-pound tipping load. It’s equipped with a Kubota V3307-CR-TE4 turbocharged diesel-powered engine. Other key features and equipment additions include the following: V3307-CR-TE4 turbocharged diesel engine, an enclosed cab with heating and air-conditioning for year-round comfort, a backup camera, a hydraulic quick-attach system, two-speed operation, and a versatile bucket that provides enhanced functionality.
Whether using pallet forks, bale spears, grapples, or augers, this wheeled skid steer ensures you operate with precision, efficiency, and, most importantly, confidence. Furthermore, its current warranty information is as follows. The emission warranty is valid until 21 July 2027, or 3,000 hours. The paint fade warranty is valid until 12 July 2025, or 10,000 hours.
At the time of listing, this unit registered 260 total usage hours (Subject to Change) and was at our Acme Tools of Bemidji, MN 56601 at 2025 30th Street NW.
Features
Engine- Emission Certification: Tier 4, Teak Torque: 196 Ft.-Lbs, Aspiration: Turbocharged, Loader Performance - Rated Operating Capacity: 2690 Lbs, Tipping Load: 5380 Lbs, Breakout Performance: Bucket: 5884 Lbs, Lift Arm: 4850 Lbs, Lift Arm Path: Vertical, Power Train: Chain Size: 100 In.
Travel Speed: 7.4 Mph Low, 11.8 Mph High, Traction Force - 8494 Ft.-Lbs, Hydraulic System - Loader Hydraulic Flow: 20.9 Gpm, Loader Hydraulic Pressure: 3271 Psi, Auxiliary Hydraulic Flow - Standards: 20.9 Gpm, High: 30.4 Gpm, Rugged loader arm design with long reach and high
Bucket Hinge Pin Height - Versatile vertical lift geometry. Hinge pin location provides maximum clearance. Auxiliary hydraulic lines routed through loader arm for safer protection. Wide cab with lots of extras. 36 In. Between the side screens is the widest in the skid steer industry; lots of elbow room. Less fatigue on your feet with an ergonomically designed foot pedal location. Easy effort sliding front door for maximum visibility and no interference with loader arms. Standard side lighting to extend the work day. Standard, wide, rear view mirror. Side windows on enclosed cab installed outside the side screen for easier cleaning. Bolt-on grab handles that can be replaced without compromising ROPs integrity. Tilt the cab with the loader arms up or down
Door Enclosed Fuel Tank and Easy Refill Access - Standard Heavy Duty Rear Door with no louvers or punch outs to protect fuel tank and other peripherals. More room in the engine compartment since fuel tank installed on inside of heavy duty rear door
Top Mounted Radiator and Oil Cooler - Easily removable top screen allows for easy cleaning. More access to daily service checks since radiator and oil cooler are out of the way
Enclosed cab, pilot/hand controls, backup camera, aux. hydraulics, heat, A/C, 2-speed, high flow, ksr kubota shockless ride control, hydraulic quick attach, bucket
Cooling System and Variable Fan - Allows for more efficient engine cooling. Lessens noise levels
Easy Battery Access - aNo additional access panels to remove. Easy to reach with jumper cables to jump start your other equipment
Common Rail System and Diesel Particulate Filter (DPF) Muffler - Better fuel efficiency. Auto regeneration. Inhibit switch. Easy Access to Routine Checks with most grease zerks recessed. The heavy rear door opens wide, providing access to all components including the battery, air cleaner, filters, and all fluid drains. Standard Two-Speed Travel - Shift from low gear at 7.4 mph (SSV75) to high gear at 11.8 mph (SSV75) to get the job done faster
Multi-Function Levers - Horn, KSR, Aux electrical control switch, Aux electrical control switch or turn signals, Single/two speed switch, Aux electrical control switch, Aux electrical control switch, Aux port variable switch for proportional flow, Aux hold switch for continuous flow, Self-leveling function with Kubota Shockless Ride (KSR)
Specifications
Brand Name
Kubota
Assembled Weight (lbs)
8422
Capacity
Fuel: 26.9 Gal, Hydraulic Fluid: 4.2 Gal
Country of Origin
United States
Cylinder Count
4
Engine
Kubota V3307-CR-TE4
Engine Displacement (cc)
3331
Ground Clearance (in)
8.1
MFG Part # (OEM)
SSV75PHFRC
Package Contents
Skid Steer Loader - Used 2022
Package Depth
100
Package Height
100
Package Weight
8422
Product Condition
Used
UPC
426000024806
Warranty Type
No Manufacturer's Warranty
Hours
260
Part Number
Z0000000000000006098